Back

About NMIE

The National Metrology Institute (NMI) of Ethiopia is established by the Council of Ministers regulation No. 194/2010 since 10th February 2011.

The Institute is responsible for the maintenance of Ethiopian National Measurement Standards and Certified Reference Materials (CRM). It also provides calibration, training and consultancy services in the areas of metrology and scientific equipments.

Mission

To make the society beneficiary of the modern measurement system by implementing  national measurement system based on the internationally accepted practices.

Vision

To be a National Metrology Institute that fulfills the country's need in the field of metrology, internationally recognized and the most credible in Africa

Objectives

The Institute shall have the objectives to:

  1. Develop national metrology system compatible with international metrology system and ensure technology transfer in the sector;
  2. Establish and implement a system that enables to compare Ethiopian National Measurement  Standfards and Certified Reference Materials with international Measurement Standards and to maintain and disseminate them;
  3. Support education and research activities in the field of metrology;
  4. Build National capacity for maintenance of scientific instruments and provide maintenance services.
  5. Provide technical training, consultancy and information services on scientific equipment with a view to supporting users to carry out their duties

what is calibration?

Calibration is a comparison between a known measurement (the standard) and the measurement using your instrument. Typically, the accuracy of the standard should be ten times the accuracy of the...

Why calibration is important?

  The accuracy of all measuring devices degrade over time. This is typically caused by normal wear and tear. However, changes in accuracy can also be caused by electric or mechanical...

When should you calibrate your device?

A measuring device should be calibrated: According to recommendation of the manufacturer. After any mechanical or electrical shock. Periodically (annually, quarterly,...

WORLD METROLOGY DAY 2017

. መግቢያ

ልኬት ከመጀመሩ በፊት በዓለም ወጥ የሆነ የአለካክ ስርዓት አልነበረም፡፡ ሰዎችም እንደየሃገራቸውና እንደባህላና ልማዳቸው የተለያዩ ነገሮችን ለመለካት የተለያዩ ባህላዊ የኣለካክ ዘዴዎችን ይጠቀማሉ፡፡ ለምሳሌ በሀገራችን ርዝመትን በክንድ፣ ስፋትን በገመድ፣ ...

ኢንስቲትዩቱ በህክምና መሳሪያዎች ጥገና ላይ ለሚሰሩ ቴክኒሽያኖች ስልጠና እየሰጠ ነው

ኢንስቲትዩቱ በህክምና መሳሪያዎች ጥገና ላይ ለሚሰሩ ቴክኒሽያኖች ስልጠና እየሰጠ ነው ስልጠናው ነሐሴ 16 ቀን 2009ዓ.ም የተጀመረ ሲሆን ዋና ዓላማውም በባዮሜዲካል ምህንድስና ላይ ተሰማርተው በስራ ላይ የሚገኙትን የባዮ ሜዲካል መሀንዲሶችና ቴክኒሻኖች የክህሎት ክፍተትን ማጥበብ እና የተሻለ የባዮሜዲካል...

National metrology Institute is giving training

National metrology Institute is giving training on "uncertainty in measurements" at Bishoftu, Ethiopian management institute for 5 days. The first round begins on June 03 and will end June...

KRISS PROVIDED TECHNICAL ASSISTANCE TO NMIE

Korean Research Institute of Standards & Science (KRISS) offered material & technical assistance to National Metrology Institute of Ethiopia (NMIE) which is established to evaluate the...

ኢንስቲትዩቱ የቶርክ ካሊብሬሽን አገልግሎት መስጠት ጀመረ

አዲስ መኪና ሲመረት እንዲሁም የተመረተው አካል ሀገር ውስጥ ገብቶ ሲገጣጠም የመኪናው ሞተር በአግባቡ መስራቱ መረጋገጥ አለበት፡፡ የመኪና ጎማም ሲታሰር እንዲሁ፤ ከሚገባው መጠን በላይ ጠብቆ ከታሰረ ወይም ከሚገባው በታች ላልቶ ከታሰረ ሁለቱም የአደጋ ምንጭ ናቸው፡፡ የቶርክ ካሊብሬሽን ለእንደነዚህ አይነት ችግሮች...

የቱርክ የሥነልክ ተቋም (UME) ከፍተኛ ባለሙያዎች ኢንስቲትዩቱን ጎበኙ

የብሔራዊ የሥነ-ልክ ኢንስቲትዩትን ላብራቶሪዎች በመጎብኘት ያለበትን ደረጃ ማሳየትና የሚሻሻሉ ጉዳዮችን ማመለካት ዓላማው አድርጎ የተካሄደው ጉብኝት በሁለቱ ተቋማት መካከል የተፈረመው የጋራ የመስራት ስምምነተት ሰነድ አንድ አካል ነው፡፡